11.0 HP StoreVirtual Storage User Guide (AX696-96275, December 2013)

category, TCP/IP tab window. Table 16 (page 54) lists the names of these interfaces. These
interfaces can be bonded a number of ways. Note that not all the bond configurations which are
supported by HP StoreVirtual Storage are supported with 10 GbE NICs.
NOTE: For the HP StoreVirtual 4630, the CMC shows an additional two NICS available for the
management network. To use these two NICs (BladeBoard3 and BladeBoard4) in the server profile,
you must add ports and assign them to the desired management network using HP Virtual Connect
Manager under Enclosure Information in the Onboard Administrator.
Table 16 Network interface names in the CMC
Port nameNIC type
P4000 G2 storage systems
Motherboard:Port1
Motherboard:Port2
1 GbE
eth2
eth3
10 GbE
HP StoreVirtual 4330, HP StoreVirtual 4530, HP StoreVirtual 4730, HP StoreVirtual 4335 storage systems
FlexLOM:Port11 GbE
FlexLOM:Port2
FlexLOM:Port3
FlexLOM:Port4
NICSlot1:Port1
NICSlot1:Port2
10 GbE
HP StoreVirtual 4630 storage systems
BladeBoard:Port1
BladeBoard:Port2
10 GbE
BladeBoard:Port3
BladeBoard:Port4
IMPORTANT: Beginning in LeftHand OS Version 10.0, the Emulex 10 GbE card now supports
a 9 Gb port speed setting with the P4800 G2. The 9 Gb port speed setting may display as an
option for the 10 GbE card when used on other storage system models besides the P4800 G2.
However, the 9 Gb port speed setting should only be used with the P4800 G2.
Supported bonds with 10 GbE
HP StoreVirtual Storage with 10 GbE NICs installed and configured supports the bond types listed
in Table 17 (page 54).
Table 17 Supported bonding configurations
ALB802.3adActive-PassiveNumber of ports x NIC type
P4000 G2 storage systems
YesYesYes2 x 1 GbE
YesYesYes2 x 10 GbE
NoNoYes1 x 1 GbE + 1 x 10 GbE in single bond
YesYesYesMultiple bonds of same type
1
YesYesYesMultiple bonds of different type
2
HP StoreVirtual 4330, HP StoreVirtual 4530, HP StoreVirtual 4730 HP StoreVirtual 4335 storage systems
54 Managing the network