10.5 HP StoreVirtual Storage DSM for MPIO Deployment Guide (AX696-96254, March 2013)

Performing a silent uninstall for the Windows 2008 Server Core option
IMPORTANT: Uninstalling the DSM for MPIO requires a reboot of the system.
1. Open a command prompt and use the cd command to navigate to setup.exe in the
installation media.
2. Type the following command:
setup /removeonly /s /f1”.\uninst.iss”
3. The uninstall begins. You will see nothing until after a minute or two, when the server reboots.
4. When the server is back up, check \Windows\dsminstall.log for errors.
12 Using MPIO