9.5 HP P4000 DSM for MPIO Deployment Guide (AX696-96111, September 2011)
Performing a silent uninstall for the Windows 2008 Server Core option
IMPORTANT: Uninstalling the HP DSM for MPIO requires a reboot of the system.
1. Open a command prompt and use the cd command to navigate to setup.exe in the installation
media.
2. Type the following command:
setup /removeonly /s /f1”.\uninst.iss”
3. The uninstall begins. You will see nothing until after a minute or two, when the server reboots.
4. When the server is back up, check \Windows\dsminstall.log for errors.
12 Uninstalling the HP DSM for MPIO