9.5.01 HP P4000 SAN Solution User Guide (AX696-96168, February 2012)

Table 71 TCP/UDP ports used for normal SAN operations with SAN/iQ (continued)
DescriptionNamePort(s)IP Protocol
storage systems. Used for
management and control.
Outgoing from management
applications. Incoming to
SAN/iQ Internal13840, 13850, 13851TCP
storage systems. Used for
management and control.
Trace Ports for SAN/iQ
Support only. Not required
SAN/iQ Support13846, 13850, 13946,
13847
TCP
for normal day-to-day
operations.
Used for Virtual Manager
communication
SAN/iQ Internal13847TCP
Used for internal data
distribution and
resynchronization.
SAN/iQ Internal13848TCP
iSCSI initiators connect to
this port when using the
P4000 DSM for MPIO.
iSCSI13849TCP
Outgoing from management
applications. Incoming to
Console Discovery27491UDP
storage systems. Used by
management applications to
discover storage systems.
Used for HTTP requests to
the CIM gateway. Outgoing
CIM Server2003, 5988, 5989TCP, HTTP/HTTPS
from management
applications. Incoming to
storage systems. Used for
management control. Ports
used for Performance
Dashboard, Global Config
request to Mgmt Gateway.
Ports for CMC notifications
for Alarms Events from Mgmt
Gateway
CIM13990 - 13999TCP
Used for heart-beating and
distributing configuration
SAN/iQ Database13891, 13893UDP
changes between
management nodes.
Used for internal control
communication.
SAN/iQ Control13888, 13889UDP
Used as iSCSI targets where
xx is the number of initiators
SAN/iQ Internal14000 – 140xxUDP
Communication to and from
the Failover Manager, when
applicable.
Failover Manager13887, 13892TCP
Communication to and from
the Failover Manager, when
applicable.
Failover Manager13947UDP
Used by the SAN/iQ
Diagnostic tool -DiagiQ that
SAN/iQ Diagnostics4443TCP
is run by P4000 Support to
get advanced diagnostics
254 SANiQ TCP and UDP Port Usage