9.5.01 HP P4000 SAN Solution User Guide (AX696-96168, February 2012)

Updating the list of manager IP addresses
Update the list of manager IP addresses to ensure that a manager running on this storage system
is communicating correctly with all managers in the management group.
Requirements
Each time you update the list of managers, you must reconfigure application servers that use the
management group to which this storage system belongs. Only update the list mode if you have
reason to believe that there is a problem with the communication between the other managers in
the group and the manager on this storage system.
To update the list of IP addresses
1. In the navigation window, select a storage system, and log in.
2. Open the tree, and select the TCP/IP Network category.
3. Select the Communication tab.
Figure 38 Viewing the list of manager IP addresses
4. Click Communication Tasks, and select Update Communications List.
The list is updated with the current storage system in the management group and a list of IPs
with every manager’s enabled network interfaces.
A window opens which displays the manager IP addresses in the management group and a
reminder to reconfigure the application servers that are affected by the update.
76 Managing the network