10.5 HP StoreVirtual LeftHand OS Command Line Interface User Guide (AX696-96242, March 2013)

HP StoreVirtual CLI| Commands| 19

Example

cliq assignVolumeChap volumeName=TheVolume targetSecret=ItsASecret

assignVolumeToServer

This command assigns a volume to a server (use for either iSCSI or FibreChannel).

Availability: Windows, SSH

Version: 9.0

Request Syntax

cliq assignVolumeToServer volumeName= serverName= login= userName= passWord=

systems

userName Conditional The authentication user name for the storage system. (Parameters

userName/passWord or groupName must be specified).

passWord Conditional The password for the storage system. (Parameters userName/passWord

or groupName must be specified).

groupName Conditional The name of the management group with cached credentials.

(Parameters userName/passWord or groupName must be specified).

volumeName Required The name of the volume

serverName Required The name of the server

accessRights Optional The access rights to the volume: r - read-only, x - no access, rw - read-

write (default)

transport Optional Set communication path to iSCSI or FibreChannel. This can be one of:

"iSCSI" or "FC", lower case accepted.

lun Optional Set LUN for FibreChannel attached volume. This can be a value 1-255.

(Note: LUN 255 not supported by Microsoft Windows)

Example

cliq assignVolumeToServer volumeName=TheVolume serverName=TheServer

cacheCredentials

This command encrypts, caches and associates the username/password with the management group name

in the registry. Thereafter, the management group name can be used instead of the username/password for

CLI command credentials.

Availability: Windows

Version: 8.0

Request Syntax

cliq cacheCredentials groupName= userName= passWord=