10.5 HP StoreVirtual LeftHand OS Command Line Interface User Guide (AX696-96242, March 2013)

HP StoreVirtual CLI| Commands| 59
userName Conditional The authentication user name for the storage system. (Parameters
userName/passWord or groupName must be specified).
passWord Conditional The password for the storage system. (Parameters userName/passWord
or groupName must be specified).
logFile Required The name of the local file used to store the returned information
Example
cliq getNsmLogs login=10.1.2.3 userName=admin passWord=secret
logFile=c:\logs.tar.gz
getPerformanceStats
This command returns performance monitoring statistics.
Availability: Windows, SSH
Version: 8.0
Request Syntax
cliq getPerformanceStats login= userName= passWord=
login Required The IP addresses or DNS-resolvable names of one or more storage
systems
userName Conditional The authentication user name for the storage system. (Parameters
userName/passWord or groupName must be specified).
passWord Conditional The password for the storage system. (Parameters userName/passWord
or groupName must be specified).
groupName Conditional The name of the management group with cached credentials.
(Parameters userName/passWord or groupName must be specified).
interval Optional The interval in between counter sampling in milliseconds. Defaults to
6000.Note: Because the internal sampling frequency is 6 seconds, it's
not recommended to set this value less than 6000
Example
cliq getPerformanceStats login=10.1.2.3 userName=admin
passWord=secret
cliq getPerformanceStats
getRemoteSnapshotInfo
This command returns information about remote snapshots.
Availability: Windows, SSH
Version: 8.0
Request Syntax
cliq getRemoteSnapshotInfo snapshotName= login= userName= passWord=
login Required The IP addresses or DNS-resolvable names of one or more storage
systems