Adding and Configuring Components

Step 8.
Using a T20 Torx driver, attach the four screws that hold the PDCA in place.
Before checking the voltage, make sure the Panel Breaker is ON and the PDCA
breaker is
OFF.
Step 9.
Using a T20 Torx driver, remove the screw on the hinged panel at the top of the PDCA. See
Figure 3.
Adding additional PDCAs
http://superdome-test.fc.hp.com/sd_web/content/00/0C/0P/idd/406.html (3 of 22) [03/01/2001 2:11:03 PM]