Adding and Configuring Components

Footnotes

Neutral-to-ground voltage can vary from millivolts to several volts depending on the distance

to the ground/neutral bond at the transformer. Any voltage over 3 V should be investigated by

a site prep or power specialists.

Marked Electrical is defined as worst case current draw. It is that over design required by

safety agencies around the world.

A dedicated branch circuit is required for each PDCA installed.

415 VAC phase to phase is possible.

( Number takes you back )

Installing a PCI Chassis - Offline

Adding additional PDCAs

http://superdome-test.fc.hp.com/sd_web/content/00/0C/0P/idd/406.html (22 of 22) [03/01/2001 2:11:03 PM]