Site Preparation Guide, Eighth Edition - Superdome HP 9000 Systems

Chapter 1
System Specifications
Electrical Specifications
17
NOTE A qualified electrician must wire the PDCA in-line connector to site power using copper wire
and in compliance with all local codes.
Each branch circuit used within a Superdome Complex must be connected together to form a common ground.
When only one PDCA is to be installed in a Superdome, it must be installed as PDCA 0. Refer to Figure 1-5
for PDCA 0 location.
b. Panel-mount receptacles must be purchased by the customer from a local Mennekes supplier.
c. In-line connector is available from HP by purchasing A6440A, Option 501.