Site Preparation Guide, Eighth Edition - Superdome HP 9000 Systems

Chapter 1

System Specifications

Electrical Specifications

I/O Expansion Cabinet Power Requirements

The I/O expansion cabinet requires a single phase 200-240VAC input. Table 1-11 lists the AC power

requirements for the I/O expansion cabinet.

NOTE The IOX accommodates two AC inputs for redundancy

I/O Expansion Cabinet Power Cords

Table 1-13 lists the power cords for the I/O expansion cabinet.

Peripheral Cabinet Power Requirements

There is a high probability that an existing peripheral cabinet may be incorporated into this system. Ensure

that adequate power is available for this cabinet and the associated peripherals.

Table 1-11 I/O Expansion Cabinet Power Requirements (without Support

Management Station)

Requirements Value

Nominal input voltage 200-240 VAC

Input voltage range (minimum-maximum) 200-240 VAC

Frequency range (minimum-maximum) 50/60 Hz

Number of phases 1

Marked Electrical input current 16A max

Maximum inrush current 60 A peak

Power factor correction 0.95 minimum

Table 1-12 I/O Expansion Cabinet Component Power Requirements

Power Required (50 - 60 Hz) VA

Fully configured cabinet 3200

I/O cardcage 500

ICE 600

Table 1-13 I/O Expansion Cabinet AC Power Cords

Part Number

A5499AZ

Where Used Connector Type

-001 North America L6-20

-002 International IEC 309