Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 5

Adding an ICE to the IOX

Installing Equipment Rails

Step 1. Open the rear door.

Step 2. Place clip nuts to the cabinet channels where the ICE is to be mounted at both the front and the

rear of the cabinet.

Step 3. Bolt the rail to the column as shown in Figure 5-1 using two T20 torx screws.

The rails have hooks, one in the front and one in the rear that fit into the slots in the rack channel.

There are two rails for each ICE. Each rail fastens to the cabinet channels with a screw in the front

and one in the back.

NOTE Some rails may be tight and require extra force to install.

Figure 5-1Attaching the Rails