Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 5

Adding an ICE to the IOX

Mounting the ICE into the Rack

WARNING Use two people or a lifting device as the unit is bulky as well as heavy.

CAUTION Use care not to damage the rear captive, mounting screws while installing the ICE.

The ICE is secured to the rear mounting bracket with two captive screws. The screws fasten to

the mounting bracket from the inside of the ICE. They, therefore, tend to stick out from the

ICE. The ICE is shipped with tape covering these two screws to keep them held in place. It is

important that these screws not get caught on or snag the cabinet channels when the ICE is

pushed into the rack.

Step 1. Using two people or a lifting device, carefully lift the ICE and slide into the cabinet.

Figure 5-3Mounting the ICE

Step 2. Slide the ICE back until the lip meets the front channels.

11/15/00

60IOX013