Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 5
Adding an ICE to the IOX
Mounting the ICE into the Rack
101
Step 5. Secure the ICE to the mounting brackets using the two captive screws.
Installing the ICE Components
You will have to install the I/O chassis into the new ICE. But before that, the I/O chassis have to be populated
with the I/O cards for your particular configuration.
Step 1. Extend the ICE on its tray by unlocking the retaining pins and sliding it out of the rack until the
rack slides lock.
Figure 5-6ICE Tray Retaining Pins
Step 2. Insert all PCI controller cards into the I/O chassis (one or two chassis).
Figure 5-7Installing the Controller Cards
Step 3. Carefully lift the I/O chassis and slide it into the ICE. Insure that it fully seats into the connectors.