Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 5
Adding an ICE to the IOX
Connecting the Cables
103
Connecting the Cables
All internal ICE cables are connected prior to shipping the ICE. The ICE has several external cable
connections on the backplane. You will have to connect the following cables:
• REO
• ICE-to-XUC clock
•Fan Control
•DC Power
• ICE Utilities
• I/O cables from the I/O chassis
Removing the Fan Shield
Before the ICE cables can be installed, you must remove the fan shields covering the XMIOBs.
Step 1. Remove the left and right I/O fans by loosening the four T10 Torx screws on each fan and pulling
them out of the chassis.
Figure 5-9ICE Fan Removal