Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 5
Adding an ICE to the IOX
Connecting the Cables
113
Step 6. Remove the plug and insert the XUC end of the clock cable into the hole.
Step 7. Locate the ICE clock cable connectors and push the clock cable into the connector closest to the
already connected cable.
Figure 5-21Clock and GSP Bus Cables
Step 8. Secure the clock cable ferrule to the back of the XUC using two T10 Torx screws.
Step 9. Reattach the cable access panel by tightening the six T10 torx screws.