Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 5
Adding an ICE to the IOX
Connecting the Cables
116
Step 8. Secure the clock cable to the strain relief arm, the roller management arm, and the rear of the ICE
chassis at the Tee-bar or cable bundle bracket.
Figure 5-24Cable Management Mechanism
Connecting the Utilities Cable
For every ICE, there is one utilities cable that runs from the XUC to the ICE.
Step 1. Locate the XUC end of the utilities cable and connect to the appropriate connector on the rear of the
XUC. See Figure 5-20 on page 112. Be sure to add enough service loop when routing the cable to
allow the ICE to extend fully.