Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 5
Adding an ICE to the IOX
Connecting the Cables
118
Step 4. Secure the connector by tightening the two captive cable connector screws. Secure the cable to the
strain relief arm, the roller management arm, and the rear of the ICE chassis at the Tee-bar or
cable bundle bracket.
Figure 5-26Cable Management Mechanism
Connecting the Fan Control Cable
For every ICE, there is one fan control cable that runs from the XUC to the ICE.
Step 1. Locate the XUC end of the fan control cable and connect to the appropriate connector on the rear of
the XUC. See Figure 5-20 on page 112.