Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 5
Adding an ICE to the IOX
Completing the Upgrade
121
Completing the Upgrade
After all cables have been installed the ICE is ready to be pushed into the cabinet.
Reinstalling the Fan Shield
Step 1. Install the fan shields by tightening the four T10 Torx screws on each shield (two per ICE).
Figure 5-29Installing ICE Fan Shields
Step 2. Install the left and right I/O fans by pushing them onto the ICE and tightening the four T10 Torx
screws. Insure that the EMI shielding is not damaged.
Figure 5-30Installing Fans