Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 5
Adding an ICE to the IOX
Completing the Upgrade
127
Step 9. Use channel brackets, tie slots, and tie-wrap anchors to secure cables that run along the rack
channels.
Figure 5-35IOX Channel Bracket
Securing the ICE
Step 1. Disengage the rail slide lock pins and slide the ICE into the cabinet and engage the tray locks.
Step 2. Install the EMI panel by tightening the retaining screw in the center of the panel. You have to hook
the top of the panel to the holes on the ICE to secure the EMI panel.
Figure 5-36EMI Screws
Step 3. Install front bezel.
Step 4. Close the rear door.