Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 6
Remove and Replace Procedures
Replacing the ICE
143
Re-installing the Fan shield
Step 1. Install the fan shields by tightening the four T10 Torx screws on each shield (two per ICE).
Figure 6-16Installing ICE Fan Shields
Step 2. Install the left and right I/O fans by pushing them onto the ICE and tightening the four T10 Torx
screws. Insure that the EMI shielding is not damaged.
Figure 6-17Installing Fans
Step 3. Disengage the ICE slide rail locking tabs and slide the ICE into the rack.
The ICE tray retaining pins will automatically lock.
Step 4. Re-install the EMI panel by pressing it onto the ICE and tightening the four captive screws.