Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 6
Remove and Replace Procedures
Removing and Replacing the ICE I/O chassis
145
Removing and Replacing the ICE I/O chassis
Removing the I/O chassis
Step 1. Disable power to the ICE by removing AC the power connector on the rear of the XPC.
Step 2. Remove the front bezel from the ICE.
Figure 6-18Removing the Front Bezel
Step 3. Remove the EMI panel from the ICE by loosening the four captive retaining screws.
Figure 6-19Removing the EMI Cover