Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 6
Remove and Replace Procedures
Removing and Replacing the ICE Fan Module
149
Step 7. Remove the fan module.
Figure 6-22ICE Fan Removal
Replacing the Fan Module
Step 1. Install the replacement fan module by sliding it into its chassis. See Figure 6-22.
Step 2. Tighten the captive retaining screw.
Step 3. Press the locks on each of the two ICE rack slides and push the ICE chassis into the cabinet.
Step 4. Twist and lock the tray retaining pins.
Step 5. Re-attach the front EMI panel by tightening its four captive retaining screws.
Step 6. Install the front cosmetic bezel.