Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 6
Remove and Replace Procedures
Removing and Replacing the ICE XMIOB
150
Removing and Replacing the ICE XMIOB
Removing the XMOIB
Perform the following procedure to replace the XIOMB:
Step 1. Disable power to the ICE by removing the DC power connector on the rear of the ICE.
Step 2. Remove the front bezel from the ICE.
Figure 6-23Removing the Front Bezel
Step 3. Remove the EMI panel from the ICE by loosening the four captive retaining screws.