Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 6
Remove and Replace Procedures
Removing and Replacing the ICE XMIOB
151
This allows access to the ICE tray retaining pins.
Figure 6-24Removing the EMI Cover
Step 4. Disengage the lock pins and slide out the ICE on its tray.
Figure 6-25Extending the ICE
Step 5. Follow the procedures in the section, “Removing the I/O chassis” on page 145, and remove the I/O
chassis in front of the XMIOB to be removed.
Step 6. Follow the procedure in the section, “Removing the ICE Fan” on page 148, and remove the two ICE
fans nearest the XMIOB to be removed.