Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 6
Remove and Replace Procedures
Removing and Replacing the ICE XMIOB
153
Step 10. Remove the screw retaining the XMIOB and slide it out of the ICE sideways.
Figure 6-27XMIOB
Figure 6-28 ICE XMIOB Location
Replacing the XMIOB
Perform the following procedure to replace the XMIOB:
Step 1. Insert the replacement XMIOB and tighten the retaining screw.
Step 2. Re-attach the previously removed cables to the XMIOB.
Step 3. Re-install the REO cable strain relief.