Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 6
Remove and Replace Procedures
Removing and Replacing the XUC Fan Module
159
Removing and Replacing the XUC Fan Module
Required Tools
The following is a list of tools required for IOX assembly and service operations:
• Anti-static mat with provisions for connecting to chassis ground
• Wrist strap
•T-20 Torx bit
• Torx drive extension
• Torx in-lb torque driver
Replacing the Fan Module
To replace the XUC fan module, perform the following procedure:
Step 1. Remove the front cosmetic bezel.
Figure 6-33XUC Cosmetic Bezel