Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 6
Remove and Replace Procedures
Removing and Replacing the PM/CLU (UGUY)
163
This panel allows access to the ICE clock and GSP bus connections.
Figure 6-37Cable Access Panel
Step 6. Connect your ESD wrist strap to the ESD grounding lug on the XUC door.
Step 7. Locate the ICE clock cables and remove it.
Figure 6-38Clock and GSP Bus Cables
Step 8. Pull the ICE clock cables from the XUC through the ferrule mounting hole(s) by removing the two
screws holding the cable ferrule.