Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 8
IOX Installation in the 10000 Series Rack
Installing the Superdome IOX
184
Step 4. Secure the front of the rail mount to the ear of the XPC and U Rack with a scissors clip. See
Figure 8-3.
Figure 8-3 Front Rail Mount
Securing the Rear of the XPC Chassis to the Rack
The rear of the XPC requires the use of extension brackets to properly fit into the U Rack.
Step 1. Use two M-5 screws to attach to the inside of the chassis. See Figure 8-4.
Figure 8-4 Inside View of XPC
Step 2. Ensure the rear tab fits over the rail mount pins already installed in the unit.
With the lower bezel
clip removed, note the
pins from the u-rail
protruding through
the mounting ear.
The deep hold-down
bracket is required
for the 10KG2 at the
rear of the XPC.
There are three
u-rail pins
indicated here.