Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 8
IOX Installation in the 10000 Series Rack
Installing the Superdome IOX
185
Step 3. Use an M-5 screw to secure the bracket in place.
Figure 8-5 XPC Rear View
Installing the ICE Enclosure into the Rack
Step 1. Ensure the ICE enclosure has the correct cut outs to fit inside a U Rack. See Figure 8-6.
Figure 8-6 ICE Front View
Step 2. Slide the ICE enclosure into the U Rack.
You should see three pins from the rail mount kit pushing out through the front plate of the ICE
enclosure.
The hold-down bracket is
not shown in this photo.
Note the clearance
features, identical to
XPC, added for the
u-rail pins.