Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 8
IOX Installation in the 10000 Series Rack
Installing the Superdome IOX
186
Installing the L Bracket on the ICE Enclosure
The ICE enclosure has changed sheet metal to accommodate the longer and deeper U Rack dimensions. Two
L brackets must be installed on the ICE once the enclosure is in the rack.
Step 1. Use the rear two screw holds on both the ICE and L bracket, see Figure 8-7.
Figure 8-7 Side View of ICE
Step 2. Pull the IOX chassis forward to allow access to the screws inside the enclosure.
Installing the XUC
The right rail mount will require two spacer blocks, one in the front and one in the rear, to be installed with
the rail mount in the U Rack
.
From the right rear, there is
a modified rear hold-down
bracket with extra PEMs to
accommodate the deeper
column on the 10KG2.
NOTE: PEMs refers to the
brand name of the threaded
insert on the bracket.
Also note the second set of
captive screws added to the
ICE chassis.