Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 2
Upgrading the Superdome for IOX
Removing Old Side Skins
33
Removing Old Side Skins
Step 1. Power down the Superdome server.
Step 2. Remove the side (the on to which the IOX is to be connected) and rear blower bezels on each server
cabinet.
Figure 2-1Removing Blower Bezels
NOTE Perform the following step only if installing the IOX on the rear-door-hinge side of
the Superdome server.
Step 3. If the rear door must be removed, perform the following steps. Otherwise, skip this step and go to
Step 4.