Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 2

Upgrading the Superdome for IOX

Installing the New Side Skins

The new side skin(s) must be installed after the new exit panel(s). The Superdome side skin required for an

IOX has a cutout that lines up with the cable feed clamps (R-PECs and U-PECS) in the new cable exit

panel(s).

Step 1. Locate the new side skin(s), remove it from the cardboard shipping container and remove the

protective plastic wrap from the new side skin(s).

NOTE The skins may be shipped with blanks installed in the cutouts.

Figure 2-10New Side Skin As Received