Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 3
Installing the IOX
Unpacking the IOX
46
Unpacking the IOX
Before Unpacking the IOX
The IOX is delivered in two boxes. The small box contains the IOX kick panel, cable exit panel, and other
miscellaneous pieces.
There are two tilt indicators on the large IOX box. Insure that they indicate that the box has not been
subjected to damaging forces.
Figure 3-1 Tilt Indicator
Unpacking the IOX
To unpack and set up the IOX into position, perform the following steps:
Step 1. Using a lift jack, roll the IOX to an convenient area, preferably near its permanent location.
The front of the cabinet is lowered onto the ramps first.
WARNING Do not use a fork lift to move the IOX cabinet.
Step 2. Cut the polystrap bands around the shipping container.