Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 3
Installing the IOX
Unpacking the IOX
50
Step 7. Remove the anti-tip stabilizer feet located under the front of the IOX by loosening the two shipping
bolts using a 13-mm socket. This task may require a ratchet extension as the bolts are
approximately 14 inches from the edge of the IOX. See Figure 3-6, Figure 3-7, and Figure 3-8.
Figure 3-6Location of Anti-Tip Stabilizer Feet
Figure 3-7Using a Ratchet Extension to Loosen the Bolts Holding Anti-Tip
Stabilizer Feet