Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 3

Installing the IOX

Connecting the IOX to the Superdome

There are two REO cables per ICE, and therefore REO cables are always connected in pairs. There are four

R-PECs and one U-PEC in the cable exit panel. The REO cable pairs from the ICE mounted lowest should

mount and run through the bottom R-PEC in the cable exit panel. Likewise, the REO cables from the next

higher ICE pass through the next higher R-PEC, and so on.

Figure 3-30 Blue Shield Protectors

Figure 3-31 Green Shield Protectors

Procedure

Step 1. Remove the rear door on the IOX to be connected to the Superdome server by sliding it up off the

hinge pins.