Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 3
Installing the IOX
Connecting the IOX to the Superdome
71
IMPORTANT Remove the protective plastic only on the appropriate shield section. Leaving the
other shield section exposed can cause inadvertent shorting.
Figure 3-34REO Shield Exposed
Step 7. Separate the halves of an R-PEC. You will have to loosen the screws in the blanks to facilitate their
removal.
The R-PEC attaches to the exposed shield in the REO cable. There are two halves that fasten
together with three T15 Torx screws. REO cables are always attached in pairs. Each R-PEC,
therefore, has two holes. Unused R-PECs must have blanks in the holes.