Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 3
Installing the IOX
Connecting the IOX to the Superdome
74
IMPORTANT The three screws need to be tightened in the following sequence: middle first, then
one side, and then the other side. Tighten each screw one turn at a time, repeating
the sequence until all three are hand tight. This tightens the clamp onto the cable
without warping.
Figure 3-37REO Cable Pair Mounted in R-PEC and Installed in Cable Exit Panel
Step 10. Connect the REO cable to the appropriate Cell board connector in the Superdome server.