Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 3
Installing the IOX
Connecting the IOX to the Superdome
76
Step 2. Remove the GSP bus U-PEC from the cable exit panel by removing the two T15 Torx screws. See
figure Figure 3-40. In the figure the IOX is not in place for illustrative purposes.
Figure 3-40Removing the GSP Bus U-PEC
Step 3. Pass the GSP bus cable through the cable exit panel.
Figure 3-41Passing the GSP Bus Cable Through the Cable Exit Panel
Step 4. Determine which shield protector to remove and pull the perforated section. Discard the plastic.