Superdome Servers - I/O Expansion Cabinet Guide, Fifth Edition

Chapter 3

Installing the IOX

Setting the Cabinet Number

After installing the IOX, the cabinet number must be set. The IOX cabinet is either 8 or 9. to set the cabinet

number:

Step 1. Remove the XUC bezel by holding it with both hands on the handles on the side of the bezel and

pulling forward.

This exposes the XUC front panel. There are two latch screws on either side of the panel.

Figure 3-48XUC Cosmetic Bezel

Step 2. With a slotted screwdriver, turn the latch screws counter-clockwise.

Figure 3-49XUC Front Panel Latch Screws

Step 3. Slide the XCPA panel up until it latches.

Step 4. Drop down the EMI panel. This allows you access to the CLU board.