Hewlett-Packard SureStore 125ex Optical Jukebox User's Guide - C1118-90000

USING OPTICAL DISKS

JUMP

CONTENTS

INDEX

LABELING AN OPTICAL DISK CARTRIDGE

Make it a practice to label your optical disk cartridges. You are provided adhesive labels with each disk for this purpose.

Here are some suggestions for labeling:

NOTE:

Your jukebox application software may label your optical disk slot locations differently. Use your application to check disk

locations prior to labeling the disks.

• storage slot location (1, 2, 3, ... )

• date of format or initialization

• disk owner (group, department, etc.)

• storage purpose (backup, old version of operating system, etc.)

HP recommends using end labels as shown in Figure 2-1. End labels reduce the chance of label material interfering with

the cartridge shutter and causing a drive to jam.

Caution: Labels used in the vicinity of the shutter may cause the drive to jam if the label is installed incorrectly or if portions of the label lift

off because of wear. If a drive jams because the label interferes with the shutter, a service call may be necessary.