Hewlett-Packard SureStore 125ex Optical Jukebox User's Guide - C1118-90000

OPERATING THE JUKEBOX

JUMP

CONTENTS

INDEX

The jukebox controller uses two SCSI IDs if your jukebox has one drive and three IDs if your jukebox has two drives.

The jukebox controller is assigned one ID and one ID is assigned to each disk drive.

The default SCSI IDs are as follows

• jukebox controller = 3

disk drive 1 (lower drive) = 4

disk drive 2 (upper drive in a two-drive model) = 5

If you are already using one of these IDs for your host bus adapter or another SCSI peripheral device, follow the direc-

tions in one of the next two sections to change either the jukebox controller or a drive ID.

CHANGING THE JUKEBOX CONTROLLER ID

Start with READY or SECURE in the display.

1. Press

NEXT until SCSI ID * displays.

2. Press ENTER. AC ID * displays. (“AC” is the “jukebox controller.”)

3. Press

ENTER. AC ID 3 displays.

4. Press

NEXT or PREV until the ID you want displays.

5. Press ENTER. SET # (# is a number from 0-7) displays briefly and then

AC ID * displays again. The ID you chose is now set.

6. Press

CANCEL two times to return to the READY state.