Hewlett-Packard SureStore 125ex Optical Jukebox User's Guide - C1118-90000

OPERATING THE JUKEBOX

JUMP

CONTENTS

INDEX

NOTE: CONFLICT displays if you attempt to set the jukebox controller and a drive to the same ID. Repeat the procedure and

reset one of the IDs to another, non-conflicting ID.

NOTE: After you change an ID you may have to restart your host computer for the new ID to be recognized.

Caution:

Do not turn power to STANDBY in this jukebox until you are sure the SCSI bus is inactive. Removing power from a SCSI

peripheral when the bus is active can result in data loss and/or indeterminate bus states. Check your host system manuals for

information about checking the SCSI bus status.

8. Switch the jukebox standby/on switch to STANDBY, then back to ON to save the new SCSI ID in jukebox memory.