Optical Drive and Library SCSI-2 Command Reference

Jukebox SCSI-2 Command Set
Receive Diagnostic Results Command (1CH)
Chapter 3 3-33
Jukebox SCSI-2 CommandsJukebox SCSI-2 Commands
Receive Diagnostic Results Command (1CH)
This command retrieves the results of a library diagnostic test performed
using the Send Diagnostic Command (Table 3-31 on page 3-35). The
diagnostic test number and parameters, error codes, and FRU
information are provided.
NOTE The following tables provide information that can help with
troubleshooting failed components in a unit. The FRUs returned should
be considered pointers to the best area within the unit to check for the
fault. Simply changing the FRU listed may or may not fix the associated
problem.
Allocation
Length The maximum number of parameter bytes that may be
sent in the Data In Phase to describe the results of the
test.
Table 3-29 Receive Diagnostic Results Command CDB
Byte 7 6 5 4 3 2 1 0
0 Operation Code (1CH)
1 Logical Unit Number
(0)
Reserved (0)
2 Reserved (0)
3 Allocation Length (MSByte)
4 Allocation Length (LSByte)
5 Control Byte (0)