HP SureStore Optical Disk Jukeboxes User's Guide - C1104-90015

3-12 Chapter 3

Operating the Jukebox

Ejecting a Disk From the Jukebox

NOTE Some software packages require that you load and eject disks by following the

instructions in the software. If you use a software package to manage files in the

jukebox, check the software documentation before proceeding with these steps.

Start with READY, LOAD * or EJECT * in the display.

1. Press

EJECT on the jukebox control panel.

2. EJECT SLOT # displays. (“#” is flashing and the number of the first storage

slot in the jukebox that contains an optical disk.)

3. If you want to select the storage slot number that shows in the display, press

EJECT or ENTER. If you want to choose a different storage slot, press NEXT or

PREV until the desired slot number displays and then press ENTER. (See the note

on the following page.)

EJECTING displays as the jukebox moves the disk to the mailslot. When the

disk is in the mailslot, the display returns to EJECT SLOT #.

4. Remove the disk from the mailslot.

You may now eject additional disks by pressing the

EJECT or ENTER key and

then following steps 2 through 4 until you are finished ejecting disks. When the

last disk is ejected, EMPTY displays briefly before returning to EJECT *.

5. Press

CANCEL to return to the READY state.