HP SureStore Optical Disk Jukeboxes User's Guide - C1104-90015

3-40 Chapter 3
Operating the Jukebox
Troubleshooting
RUN ISTAT TEST
displays (this initializes
the element status)
• Power cycle the jukebox.*
•
Run the INIT ELEM STATUS test under the
TEST * menu
• If steps above do not result in a READY display,
call your service representative.
Can't write to the disk. • Check the host file system access permissions.
• Eject the disk and check that the write-protect
tab on each side of the disk is in the
write-enabled position.
• Check your application software.
• If steps above are unsuccessful, call your service
representative.
*Ensure that the SCSI bus is inactive before removing power to the jukebox.
Removing power to a device on an active SCSI bus can cause data loss and/or
problems with the SCSI interface.
Problem What to do