HP CD-ROM Server User's Guide

Basic Installation 2-3
Accessories
You may need some additional hardware to complete your
installation. Available hardware from Hewlett-Packard are
listed below.
SCSI Cables
For the Stand-Alone Module Only.
HP provides the following
SCSI-2 cables and terminators. For other SCSI-2 cables or
terminators, consult with HP or your local cable vendor.
Note ❏ Industry-standard SCSI-2 cables and terminators are available
in different lengths and with different connector types. You
must obtain the proper cables to match the connectors on your
CD-ROM drives. HP SCSI cables may, or may not, be suitable
for your drives..
Additional Power
Supplies
For the Stand-Alone Module only.
HP provides the following
power supplies for other countries and regions:
HP Product (meters) SCSI Connector Type
C2955A (0.5 m)
C2908A (1.0 m)
C2956A (1.5 m)
C2957A (2.0 m)
50-pin high-density (thumb screws),
male/male
K2286 (1.0 m)
50-pin low-density (bail lock) to high-density
(latch clip), male/male
K2296 (1.0 m)
K2297(1.5 m)
50-pin low-density (bail lock) to high-density
(thumb screws), male/male
92222A (0.5 m)
92222B (1.0 m)
92222C (2.0 m)
50-pin low-density (bail lock), male/male
(For drive-to-drive connections only)
K2291
Active Terminator, 50-pin low-density, (bail
lock)
C2904A
Active Terminator, 50-pin high-density, (thumb
screws)
Region HP Part Number
Japan 0950-3267
Australia 0950-3269
South Africa 0950-3272
Israel 0950-3273
hp.book Page 3 Thursday, April 2, 1998 4:33 PM