HP CD-ROM Server User's Guide

Mounting or Mapping Network Drives 4-7
3. Expand the Entire Network icon and open the NetWare
networking folder.
4. Double click the entry for your new CD-ROM server. The
default entry name is
HP hhhhhh _NW
, where
hhhhhh
are the last
six digits of the CD-ROM server LAN hardware (MAC)
address. The name can be changed during configuration as
described in chapter 5 “CD-ROM Server Configuration”.
5. If you are using Bindery mode you will be prompted to enter
your user name and password, unless you are already logged
in. Before the CD-ROM server has been set up, all users have
full access to it.
hp.book Page 7 Thursday, April 2, 1998 4:33 PM