HP CD-ROM Server User's Guide

Mounting or Mapping Network Drives 4-13
Windows 95 and
Windows NT 4.0
1.
Start the Windows Explorer from the Start/Programs Menu.
2.
Expand the Network Neighborhood icon. The available
resources are displayed:
3.
Expand the Entire Network icon and then open the Workgroup
folder. If the Workgroup folder is not visible, refer to
“
Alternative Method of Connection
” later in this chapter.
4.
Double click the entry for your new CD-ROM server. The
default name is
HP hhhhhh
, where
hhhhhh
are the last six digits
of the CD-ROM server LAN hardware address.
Notice that the individual CD-ROMs are shown as well as the
cd
folder that contains them. This is not the normal
hierarchical appearance, but it is done this way to give you the
choice of either mounting individual CD-ROMs, or all of them
together. See the note below if you would like more
information.
Note
❏
If the configuration parameter
ShowPseudoShares
has been
set to
no
(see chapter 6), the only files you will see are the
CD-ROMs.
hp.book Page 13 Thursday, April 2, 1998 4:33 PM