HP CD-ROM Server User's Guide

CD-ROM Server Configuration 5-5
3. In the config folder, locate the
config.ini
file. Open the file
using the Windows Notepad editor or any other editor. In a
standard Explorer setup, double clicking an ‘.ini’ file will
automatically open the file with the Notepad editor. An
example is shown below.
See appendix B for a list of the config.ini file’s contents.
Note
❏
The configuration file illustrated above is for version 4.11 of
the HP CD-ROM Server firmware. As firmware updates
become available, the configuration files may change. Refer
to appendix C for more information.
4. Enter new settings by editing each parameter in the file.
Further explanation of the parameters is available in
appendix B “The Config.ini File”.
5. To activate the new settings it will be necessary to restart the
CD-ROM server. This can be done by setting the
Restart
parameter to
yes.
The CD-ROM server will restart when you
save the file.
6. Save the file. Saving the file sends the new settings to the
CD-ROM server. If you have set the
Restart
parameter to
yes
,
the server will restart and the indicators will flash during the
self-test. When the STATUS indicator stops flashing and
remains off, the server is ready for use with the new settings.
CAUTION
❏
When editing the file, be sure that there is a space between
the equal sign and the parameter value.
❏
Do not remove the
[END]
marker from the file.
hp.book Page 5 Thursday, April 2, 1998 4:33 PM